HomeCompany InfoPhoto GalleryContact Info

YOUR PIPELIFTING PARTNER

VacWorkingPic1.jpg

HOW IT WORKS

Lift Technologies, Inc. manufactures vacuum lifters for use in lifting all diameters and various types of pipe from steel and concrete to plastic.  The LT30 vacuum lifter uses a diesel engine coupled with a high volume vacuum pump and lifting pad to create a powerful seal which can lift up to 30,000 lbs.  Each machine is fitted with lifting pads that create the seal required for the machine to draw a vacuum between pipe and pad when the rubber seals come in contact with the pipe.  The lifting pads come in a variety of diameters to fit project specific pipe diameters. 

Typically the lifter is used as an excavator attachment to lift and position pipe as needed.  This allows the operator to move the pipe in a smooth rotating motion versus using a sideboom and turning the entire machine to position the pipe.  Once the pad is in place the operator pushes a remote button from the cab of the excavator, engaging a vacuum valve that causes the pump to draw a vacuum.  The vacuum created between the pipe and lifting pad keeps the pipe attached to the lifter, allowing the operator to lift and move the pipe until the vacuum on the pad is released.

 
 
The efficiency and safety of vacuum lifting make it ideal for loading and unloading large quantities of pipe.
 
 

Thank you for visiting our website!

Please check back often, we will be updating and adding new material to our site for you to see.

 

 



LTlogo.jpg

Our Location
 
5162 S 24th W Ave
Tulsa, OK  74107
Phone:  (918) 794-8088
Fax:  (918) 794-8090
 
Office Hours
 
Monday - Friday
8:30AM to 5:30 PM





Comments?     Ideas?     Questions?
E-mail us at:

info@lifttechnologiesinc.com